1Winkhaus hardware
German activPilot hardware switches the sash between tilt and turn.
Replacement Windows · Central PA
Tilt for Fresh Air. Turn for Easy Cleaning. Close for a Tight Seal.
Triple-pane tilt & turn windows that keep cold and noise outside. Made to your existing opening in almost any color, from crisp white to golden oak, and installed by crews that work only with us.
No sales visit · No measurements needed · Phone or email, your choice
4.9 on Google14 reviews from
local homeownersRead reviews →
local homeownersRead reviews →
Written Warranty5 years on frame & hardware,
2.5 years on installationSee the terms →
2.5 years on installationSee the terms →
Since 2019Crews with thousands of
premium windows behind them
premium windows behind them
Licensed & InsuredPA HIC #PA177575 · MD MHIC #135533
EPA Lead-Safe Certified Firm
EPA Lead-Safe Certified Firm
How Tilt & Turn Works
One handle. Three positions.
New to tilt & turn? It takes one try. The handle decides how the window opens: pick a position to see what the sash does and when you would use it.
Tilt
Fresh air, without a full swing.
The top of the sash leans a few inches into the room while the bottom stays held in the frame.
- Airing a bedroom overnight
- Letting air in during light rain
- Rooms where a wide-open window is not wanted
What You Are Buying
Built to keep drafts out
A double-hung slides past its seals. A tilt & turn sash presses into them, so a closed window stays tight in every season. These six parts make the difference.
2One HOPPE handle
Down to lock, up to tilt, sideways to turn. Key-lock and child-safe versions available.
3Locking points
The handle pulls the sash in at several points around the frame.
4Continuous gaskets
Two seals run all the way around the sash; three on the Synego MD series.
5Triple-pane glass, standard
Low-E glass with a SWISSPACER warm-edge spacer in every window. Four-pane glass on the upper series.
6REHAU frame, made to size
German REHAU profile, built to the measured size of your existing opening.
Three REHAU series. One aluminum.
Every series comes with the same Winkhaus hardware, triple-pane Low-E glass and the same installation. You choose how much frame you want to pay for.
Swipe sideways to compare all four series →
| Feature | StandardREHAU Euro-Design 70 | PremiumREHAU Synego MD | TopREHAU ARTEVO | AluminumAluprof MB-86 |
|---|---|---|---|---|
| Frame | 70 mm, 5 chambers | 80 mm, 7 chambers | 80 mm, fiberglass core (RAU-FIPRO X), no steel | 77 mm, thermal break |
| Seals | 2 | 3 | 3 | 2 |
| Glass | Triple pane, 40 mm, Low-E | Triple pane · 4-pane optional | Triple pane, 48 mm, two Low-E coats · 4-pane optional | Double pane, 50 mm, Low-E, argon |
| U-factor* | ≈ 0.23 | ≈ 0.18 | listed in your quote | ≈ 0.21 |
| Sound reduction | up to 43 dB | — | up to 48 dB | — |
| Security | Multi-point locking | Multi-point locking | Up to RC2 on request | Multi-point locking |
| Price vs. standard | Base price | +15% | +35% | about +75% |
*Manufacturer data from European testing, not NFRC ratings. Argon fill is optional on uPVC series (+3%) and standard in aluminum. Your quote lists the series and glass for every window.
Pricing
before you call. →
See what your windows may cost
Count your windows by size and see an installed price range before you give anyone your phone number.
Installed priceRemoval, installation, trim, screens, cleanup and taxes included
Rough sizes are enoughWe measure every opening before ordering
Written quote after measuringFixed after the check-measure, valid 30 days
Know the numberbefore you call. →
Get your range
Two quick steps, one optional. Change the numbers any time.
Step 0 of 2
1How many windows of each size?Not sure? Count them all as Standard.
SmallBathrooms, stairs · up to 36 × 48 in
StandardBedrooms, kitchens · up to 48 × 60 in
LargeLiving rooms · up to 72 × 72 in
Oversized windows or a patio door? Add them in the notes on the next step; we price those on the call.
- Width. Inside the frame, left to right, across the middle.
- Height. From the sill up to the top of the frame.
- Round to the nearest inch and pick the size row it fits.
A rough size is enough for a range. We measure every opening ourselves before anything is ordered.
2What is the work?Most projects are straight replacements.
Profile series · not sure? Leave it and see the full range
Most of my windows open…
Frame color
Glass
Starting Budget Range
Add at least one window and choose the work
- Triple-pane glass, screens, removal, installation, trim inside and out, cleanup and taxes included
- Financing available through Affirm, subject to credit approval
Your written quote follows a check-measure visit and is valid 30 days.
Request My Quote →
Talk It Through: 15-Min Call
A Planning Call with our window specialist: count sizes and options together, so the price you plan for is the price you pay.
Comparing quotes? A low number often covers the window only. Check that removal, installation, trim, cleanup and haul-away are included, then compare. Ours lists every line.
In your written quote
- Windows with triple-pane glass and Winkhaus hardware
- Insect screens and delivery
- Removal and haul-away of the old windows
- Installation with waterproofing tape and sealant inside and out
- Exterior trim and interior trim
- Cleanup and all taxes
Listed as separate lines
- Repair of a rotten or damaged opening (see right)
- Changes to the size of an opening
- A municipal permit, if your town requires one, at cost
If we find hidden rot
We stop, show you photos and agree the cost in writing — a change order you sign before we continue. No surprises on the invoice.
Typical opening repairs: minor $150–250; replacing a sill or jamb $350–600. Structural damage is quoted separately.
Plan the Fit
Will it work in my room?
The sash opens into the room, so it is worth a look at what sits near the window. Pick what you are unsure about.
What to check
Opening space
The sash swings into the room in turn mode. Note any furniture or objects near the opening when discussing your project.
Tilt needs only a few inches. Turn needs the width of the sash.
Ask About My Windows →Your topic is added to the request. Exact sizes and photos are not required.
Window Types
A window for every opening in the house
A narrow stair window, a wide living room opening or a basement vent: the same REHAU frame, hardware and look throughout the house.
Tilt & Turn
One sash that tilts and turns. The standard choice for most openings.
Best for bedrooms, baths and kitchens
Two-Sash
Two operating sashes in one frame, with a center post or without one for a clear opening.
Best for living rooms and wide openings
Fixed + Tilt & Turn
A fixed pane for the view with an operating sash beside it.
Best for picture windows and stairwells
Tilt-Only & Picture
A tilt-only sash for basements and bathrooms, or a fixed picture window, with a transom above if you like.
Best for basements, baths and tall openings
More opening for egress. In turn mode the whole sash swings clear, so a tilt & turn gives a larger clear opening than a double-hung of the same size. Arched and shaped windows on request. Units up to 157 in (white) or 98 in (laminated colors).
Finishes
Same window, a different house.
Frame color changes how the window reads from the street and from the sofa. Pick any of the nine standard colors to see it on the same window.
White
Blends with painted trim and light walls. The most common choice for traditional homes.
9 standard colors
RENOLIT foils (Germany) with UV protection. Color outside only +10%, both sides +15%; different colors in and out are possible. About 30 more RENOLIT colors and RAL paint on request.
A Local Project
New windows. Same house.
Owners of older homes worry about losing their trim and the character of the house. Here is how one colonial kept both.
Window Replacement
Colonial home, Boalsburg
- The goal
- Replace aging windows while keeping the home’s traditional appearance.
- The work
- White tilt & turn windows sized to the original openings, with interior trim matched to the existing profile.
- The result
- The facade reads as before. Interior returns and sills were finished in white to match the trim.
“They matched the trim so well that guests don’t notice the windows changed, until they open one.”
From First Call to New Windows
What happens, and when
Made-to-order windows take about three months from contract to installation. Here is the whole path in five steps, including what we need from you at each one.
A sales representative calls you back at the time you picked to talk through your rooms, options and a starting budget.
From you: a rough window count.
We check-measure every opening and send a written quote, line by line. The price is fixed here. Nothing is ordered until you sign, and you can cancel within 3 business days.
From you: access to the rooms.
Built at our European partner plant from REHAU profiles with Winkhaus hardware, to your measured sizes, for your order only.
From you: nothing. Old windows stay in.
Every window is opened in both modes, adjusted, and checked for seals and glass before it ships.
From you: nothing. We confirm your install date.
We install, finish the trim inside and out, clean up and walk you through every window before you sign the completion certificate.
From you: clear space near the windows; blinds, curtains and alarm sensors taken down.
Step 1 takes about 15 minutes. No measurements, no visit, no commitment.
Start with a Planning Call →
Rooms left the waywe found them. ↘
Installation Day
Installed by crews who do only this.
A good window installed badly is a bad window. Our crews work only with Uniview and have thousands of premium windows behind them, so your opening is finished right the first time.
- Floors and furniture coveredBefore the first window comes out.
- One opening at a timeNo room is left open overnight.
- Foamed, taped and sealedFoam, waterproofing tape and sealant inside and out.
- Trim inside and outExterior and interior trim finished to match the house.
- Walkthrough with youYou operate every window, then sign the completion certificate.
- Service after the saleSame number, same email. Urgent issues get a call back the same business day.
Warranty: 5 years on frame and hardware, 2.5 years on installation →
Warranty & Service
Covered in writing, for years
One company stands behind both the window and the installation, so nobody passes you between a seller and an installer. The full document comes with your agreement — and you can read it right now.
5yearsFrame & sash
REHAU uPVC frame, sash and mullion: cracking, warping, peeling or material defects.
5yearsHardware & handles
Winkhaus tilt & turn mechanism, locks, hinges and HOPPE handles.
2.5yearsInstallation
Leaks or improper operation caused by our installation. Labor on any covered repair is free in this period.
2.5yearsGlass seal
Seal failure causing fogging or film between the panes.
Free adjustment in the first year
Transfers once to the next owner
One number and one email for sales and service
Shorter terms apply to gaskets and color finish (18 months), insect screens (6 months), aluminum frames (2.5 years) and key-lock handles (1 year). After the installation period, covered parts stay free and labor is billed at our service rate.
Google Reviews
Rated 4.9 by local homeowners
Neighbors in Central Pennsylvania, in their own words on Google. Short excerpts here, the full reviews one click away.
“My wife swears by european style tilt-turn windows, and now I do too. … Never going back to double-hung!”
JJustin MacGoogle review
“We had contacted several companies… Dan’s team did an amazing job! Great quality, neat work…”
AAlex SGoogle review
“…they left everything clean and neat… The team also took the time to explain how to use the new windows…”
OOksana LakhnovaGoogle review
“From consultation to measurement, the team was very precise.”
PPeter GramataGoogle review
“They took away all the debris and cleaned any mess they made.”
MMichael McMahonGoogle review
“We are particularly happy with the large sliding doors and windows.”
EElina RibakovaGoogle review
Read all 14 reviews on Google →
Service After the Sale
Reply within 1 business day; urgent cases the same day.
Licensed & Insured
PA HIC #PA177575 · MD MHIC #135533
Written Quote
Fixed before anything is ordered.
Since 2019
Installing in Pennsylvania and Maryland.
Service Area
Do we install in your town?
Our crew works in State College, Altoona and the towns between — seven counties in the middle of the state.
Also registered in Maryland (MHIC #135533). Maryland projects are quoted case by case.
We serve:
State College · Altoona · Bellefonte · Lewistown · Huntingdon · Hollidaysburg · Tyrone · Philipsburg · Lock Haven · Johnstown · Boalsburg · and surrounding areas
FAQ
Questions before you decide
The questions Central Pennsylvania homeowners ask us most. If yours is not here, call — we are happy to help.
Call us with your questions(814) 888-4432
Mon – Thu, 11am – 4pm. When we’re busy, our AI assistant answers, takes down your project and makes sure a real person calls you back fast.
A sales representative — usually the owner — replies by the method you chose within 1–2 business days. The call takes about 15 minutes. If it makes sense, we propose a time for a check-measure visit. Nothing is booked until you confirm it.
Yes, from a single window. The minimum order is $4,500, because the crew visit and delivery cost the same for one window or ten. Orders of one or two windows ship with the next larger batch, so allow one to two extra weeks. We keep your frame color and glass on file so later phases match.
The hardware is more complex and every window is built to your opening rather than a stock size. Our prices also include triple-pane glass, screens, trim inside and out, removal and taxes, so compare the whole quote, not the window alone. Ours lists every line.
One third when you sign the agreement; the balance on the day installation is complete, after you have checked every window with us. Both are invoiced through QuickBooks, and you can pay by card, bank transfer or over time through Affirm. You may cancel within three business days of signing; we place the factory order only after that period.
Interior and exterior trim are part of every quote: we finish it to match the room, or keep what is there when it is sound. We check the trim and sills at the measurement visit, and your quote says what stays and what is replaced.
Not if you don’t want them to. Options include a HOPPE handle with a key, tilt-first hardware (the window tilts before it can swing) and an opening restrictor. Tell us which rooms when we measure.
Yes. We work one opening at a time and close each one before moving on. Most homes, up to about ten windows, take one day; larger projects two. Please take down blinds, curtains and alarm sensors before we arrive.
In writing, from the installation date: 5 years on the REHAU frame and sash, 5 years on hardware and handles, 2.5 years on installation and on the glass seal, plus a free adjustment in the first year. Labor on covered repairs is free for 2.5 years. The warranty transfers once to the next owner. Read the full document.
Uniview does, for both the window and the installation. Send a service request with your agreement number and a photo, call (814) 888-4432 or email univiewwindows@gmail.com. Urgent problems — a window that won’t close or lock, broken glass, water coming in — get a call back the same business day and a visit within two business days. Everything else: a reply within one business day and a visit within ten. Out of warranty, a service visit is $149 and covers adjustment of up to five windows; if the inspection finds a covered defect, the fee is waived.
Yes, through Affirm, subject to credit approval. You choose “Pay over time” right in your invoice and get an instant decision; checking your eligibility does not affect your credit score.
At our European partner plant, in business since 1998, from German REHAU profiles, Winkhaus hardware and Guardian glass with SWISSPACER warm-edge spacers; aluminum windows use Aluprof profiles. Each window is made to your measured sizes, carries the Uniview Windows marking alongside the REHAU and Winkhaus marks, and arrives at our Central Pennsylvania warehouse before installation.
About three months from signing to installation: a check-measure visit, 10–12 weeks of manufacturing and delivery, then one or two days of installation. Small orders of one or two windows may take one to two weeks longer.
A standard window A/C unit does not fit a tilt & turn window, because the sash opens inward. We point this out at the measurement visit; through-wall and mini-split units are not affected.
Yes, insect screens are included. Because the sash opens inward, the screen sits on the outside and stays in place when the window is open. Pet-resistant screens are available on request.
Usually, especially if your current windows are drafty or single-pane, but the savings depend on the house. We don’t promise a percentage. We show you the manufacturer’s values for the windows we propose, so you can compare them with what you have.
Plan First. Measure Later.
A 15-minute call. Not a sales visit.
Talk to someone from our local team about your rooms, your options and a realistic budget. No measurements, no one in your living room, no pressure to decide.
- 1You tell us about the houseWhich rooms, how many windows, what bothers you now.
- 2We answer your questionsFit, configurations, finishes and a starting budget.
- 3You decide the next stepA measurement visit and written quote, or nothing at all.
About 15 minutesPhone or email, your choiceNo obligation